RPM 1/16th Scale Mini E-Revo Front/Rear Upper & Lower A-arms now available in Red

New from RPM:

Due to popular demand RPM now offers these Front/Rear Upper & Lower A-arms for the Traxxas 1/16th Scale Mini E-Revo in Red.

Front A-arms for the Traxxas 1/16th Scale Mini E-Revo

Upon the release of the Traxxas 1/16th Scale Mini E-Revo, we immediately started receiving requests for durability upgrades. What better place to start than the front A-arms? With our guaranteed unbreakable material and a proven A-arm design based off of our larger, 1/10th scale Revo A-arms, durability for these little monsters has arrived!

A significant problem we eliminated was slop in the suspension system. In some cases, we found as much as 1/32” of slop in the stock A-arms! That has been remedied with these new RPM versions. Our A-arms eliminate nearly all of the A-arm slop, which allows camber, caster and toe angle settings to be more solidly fixed in position. The result: A smoother, more consistent steering and suspension system with a significantly reduced tendency for the truck to randomly wander while driving.

Unique to RPM suspension arms is our angled leading and trailing edges. We incorporate a 30-degree bevel in these areas, which reduces the chance of breaking suspension parts since the A-arm will naturally try to transition over objects instead of bluntly plowing into them.

RPM front A-arms for the Traxxas Mini E-Revo are sold in sets of four – both upper and both lower a-arms. What’s best is these miniature E-Revo A-arms, like all RPM molded products, are backed by our industry-leading breakage warranty. If it breaks (under normal operating conditions), send it in and we’ll replace it!

80692 Front Upper & Lower A-arms – Black
80695 Front Upper & Lower A-arms – Blue
80699 Front Upper & Lower A-arms – Red Available 03.29.10

Suggested Retail $14.95

Rear A-arms for the Traxxas 1/16th Scale Mini E-Revo

Similar to RPM front A-arms (#80692 & #80695), our rear arms eliminate nearly all of the A-arm slop typically found in stock Mini E-Revo rear A-arms, allowing camber and toe angle settings to be more solidly fixed in position. The result: A smoother, more consistent suspension system with a significantly reduced tendency for the truck to randomly wander while driving.

RPM rear suspension arms match the same design elements as our fronts using angled leading and trailing edges. By incorporating a 30-degree bevel in these areas, we reduce the chance of breaking suspension parts since the A-arms will naturally try to transition over objects instead of bluntly plowing into them.

RPM Mini E-Revo rear A-arms are sold in sets of four – both upper and both lower A-arms. What’s best? These miniature E-Revo A-arms, like all RPM molded products, are backed by our industry-leading breakage warranty. If it breaks (under normal operating conditions), send it in and we’ll replace it!

80602 Rear Upper & Lower A-arms – Black
80605 Rear Upper & Lower A-arms – Blue
80609 Rear Upper & Lower A-arms – Red Available 03.29.10

Suggested Retail $14.95

The post RPM 1/16th Scale Mini E-Revo Front/Rear Upper & Lower A-arms now available in Red appeared first on RC Car Action.