Pro-Line Street Fighter HP 3.8″ Street BELTED Tires Mounted
Featured News Product News

Pro-Line Street Fighter HP 3.8″ Street BELTED Tires Mounted

22 November, 2019

Pro-Line Street Fighter HP 3.8" Street BELTED Tires Mounted Pro-Line Street Fighter HP 3.8" Street BELTED Tires Mounted Pro-Line Street Fighter HP 3.8" Street BELTED Tires Mounted

From Pro-Line:

Are you looking for the ultimate street tire for your 3.8″ Monster Truck? Pro-Line now has the solution for you with the all-new Street Fighter HP BELTED 3.8″ tires! Pro-Line has developed the technology to mold a High-Performance herringbone weave pattern Belt inside of the Street Fighter HP tires that will prevent the tire from ballooning or expanding during use. This will give you maximum control to put the power down even at high speeds! The Street Fighter HP 3.8″ tires provide the incredible grip that you expect from Pro-Line due to the soft M2 compound and the aggressive tread grooves. Pro-Line also heard the calls for a new tire size to fit the current generation of Monster Trucks and the Street Fighter delivers at 3.11″ wide and 6.22″ tall. Just like all of Pro-Line’s tires, they are proudly Made in the USA! Get maximum grip and stability so you can be faster than your buddies with Pro-Line’s all-new Street Fighter HP 3.8″ Monster Truck tires!

Please note that the Street Fighter HP tires have a maximum speed rating that, if exceeded, could result in permanently damaging the internal belt. For the Street Fighter HP 3.8″ tires that is 95 mph or about 5,000 RPM. Over revving your Street Fighter HP tires could result in breaking the internal belt, which will NOT be covered under warranty. This can be caused by “diffing out” your tires or holding the throttle open while one, two or three of your tires are stopped, which substantially increases the RPM sent to the free-spinning tire or tires.

The new Belted Street Fighter HP 3.8″ tires come Pre-Mounted on the next generation 3.8″ wheel design from Pro-Line, the Raid 3.8″ Removable Hex Wheel! Imagine being able to replace a damaged wheel hex without needing to replace your glued tires! These new Raid 3.8″ wheels make this possible by using a unique 8×32 interlocking hex design that is secured to the wheel by 8 M3 screws that are spaced 32mm across. The hexes are included and are also available separately (6345-00). The built-in adjustability and ease of use make this a new must-have wheel for bashers everywhere! Be the first to own the latest and greatest technology from Pro-Line, get the new Street Fighter HP 3.8″ Belted tires now!

Tire Features:

  • Molded-in High-Performance Herringbone Weave Pattern Belt
  • Street Fighter HP 3.8″ tires Will Not Balloon or Expand During Use
  • Soft M2 Compound Provides Incredible Grip on Your Street
  • Belted Tires Give You Control to Put the Power Down
  • New Tire Size comes in at 3.11″ wide and 6.22″ tall
  • Soft Foam Inserts Included
  • Made in the USA, since 1982

Wheel Features:

  • Removable Hexes Allow you to Easily Replace Damaged Hexes
  • 17mm Wide Offset 8×32 Hexes are Included
  • Wheel Made from High-strength, Durable DuPont Nylon Material
  • Raid 10-spoke Wheel Design Mimics Full-size Racing Wheels
  • M3 Wheel Hex Hardware Included

What’s Included:

  • Pre-Mounted Street Fighter HP 3.8″ BELTED Tires on Raid Black 8×32 Removable Hex Wheels (2 pcs)
  • 8×32 to 17mm 1/2″ Offset Hex Adapters (2 pcs)
  • M3 x 12mm long SHCS hardware (16 pcs)

Fits:

  • E-REVO® 2.0
  • SUMMIT®
  • Tekno MT410
  • ARRMA Kraton
  • Other Monster Trucks with 17mm Hexes

Specs:

Height: 6.22″ ( 158mm)
Width: 3.11″ ( 79mm)

#10167-10 – $72.95

Visit Prolineracing.com
See more posts about Pro-Line

Pro-Line Street Fighter HP 3.8" Street BELTED Tires Mounted Pro-Line Street Fighter HP 3.8" Street BELTED Tires Mounted Pro-Line Street Fighter HP 3.8" Street BELTED Tires Mounted

Never miss an issue of RC Car Action!

Subscribe today with a Digital Edition subscription or Print + Digital combo!

The post Pro-Line Street Fighter HP 3.8″ Street BELTED Tires Mounted appeared first on RC Car Action.

Trevor Duncan

Engineering leader at a pre-IPO startup