Pro-Line February 2012 Releases
Durango Featured News HPI Losi Product News Team Associated Traxxas

Pro-Line February 2012 Releases

17 February, 2012

Pro-Line has released a ton of gear for February like a Flo-Tek Ford F-150 Raptor SVT body, ProTrac Suspension kits for the Traxxas Slash 4×4 and Stampede 4×4, Tazer SC tires, 2012 BullDog bodies for popular 2WD buggies, plus some great looking scale accessories for rock crawlers. Read the press release below for more info:

This is the ProTrac™ Suspension Kit for the Stampede® 4×4. Pro-Line’s new ProTrac™ Suspension kit for the Stampede® 4×4 is an easy to install kit that greatly increases forward acceleration, corner speed, consistency and drivability. Pro-Line revolutionized the 2WD Slash® with the original ProTrac™ Suspension kit and now the same advantages are available for your Stampede® 4×4! The kit includes longer Front and Rear suspension arms for improved handling and a wider stance that will make your truck more stable while bashing around. The ProTrac™ arms not only look tricker than the stock arms, but they are beefier and have more suspension adjustment holes so you can dial in the truck faster than ever. With this suspension kit installed on your Stampede® 4×4 you can run any wheels made to fit the Stampede® 4×4 and you will have a wider and more stable truck. If you only do one upgrade to your Stampede® 4×4, this is by far the one to have because Pro-Line’s new ProTrac™ Suspension kit will transform your truck into an unstoppable BASHING MACHINE!

**While the stock axles will work with the ProTrac™ Suspension Kit, some customers may want a heavy duty CVD option for their truck (for Racing or Extreme Bashing purposes). The following MIP option has been confirmed to work with the kit:

MIP #11104 X-Duty CVD Kit (2 Required for Front and Rear)
MIP #10133 X-Duty Front Axle (2 Required for Front Left and Front Right)

Features:

  • Widens your Truck drastically improving stability and handling
  • Beefy and Trick Suspension Arms – Made in the USA
  • Longer and stronger turnbuckles with included wrench

What’s Included:

  • 50mm x 4mm Rear Camber Links 6062-06 (2 pcs)
  • 60mm x 4mm Front Camber Links 6082-02 (2 pcs)
  • 70mm x 4mm Steering Links 6062-07 (2 pcs)
  • Turnbuckle Wrench 6062-49 (1 pc)

Fits

  • Traxxas® Stampede® 4X4

6083-00 – $42.46

ProTrac Suspension Kit (4×4) for Slash 4×4
This is the ProTrac™ Suspension Kit for the Slash® 4×4. Pro-Line’s new ProTrac™ Suspension kit for the Slash® 4×4 is an easy to install kit that greatly increases forward acceleration, corner speed, consistency and drivability. Pro-Line revolutionized the 2WD Slash® with the original ProTrac™ Suspension kit and now the same advantages are available for your Slash® 4×4! The kit includes longer Front and Rear suspension arms for improved handling, ProTrac™ wheels that bring the truck back to Stock ROAR Legal width and new longer turnbuckles. The ProTrac™ arms not only look tricker than the stock arms, but they are beefier and have more suspension adjustment holes so you can dial in the truck to your track. Also, Pro-Line’s ProTrac™ wheels have become the standard in the 4×4 SC class with the SC10 4×4 and SCTE 4×4 both capable of running ProTrac™ wheels. If you only do one upgrade to your Slash® 4×4, this is by far the one to have because Pro-Line’s new ProTrac™ Suspension kit will transform your truck into a true RACING MACHINE!

**While the stock axles will work with the ProTrac™ Suspension Kit, some customers may want a heavy duty CVD option for their truck (for Racing or Extreme Bashing purposes). The following MIP option has been confirmed to work with the kit:

MIP #11104 X-Duty CVD Kit (2 Required for Front and Rear)
MIP #10133 X-Duty Front Axle (2 Required for Front Left and Front Right)

Features:

  • Drastically Improves performance over stock
  • Beefy and Trick Suspension Arms Made in the USA
  • Latest style Renegade Black ProTrac™ Wheels Included
  • Longer and stronger turnbuckles with included wrench

What’s Included:

  • Front and Rear ProTrac™ arms 6082-01 (4 pcs)
  • ProTrac™ Suspension Kit Renegade 2.2”/3.0” Black Wheels 2727-03 (4 pcs)
  • 50mm x 4mm Rear Camber Links 6062-06 (2 pcs)
  • 60mm x 4mm Front Camber Links 6082-02 (2 pcs)
  • 70mm x 4mm Steering Links 6062-07 (2 pcs)
  • Turnbuckle Wrench 6062-49 (1 pc)

Fits:

  • Traxxas® Slash® 4×4

6082-00 – $50.96

This is Replacment ProTrac™ 4×4 Front Camber Links for the Slash® 4×4 and Stampede® 4×4.

Features:

  • Front (60mm x 4mm) Camber Links

What’s Included:

  • 60mm x 4mm Front Camber Links (2 pcs)

Fits:

  • Traxxas® Slash® 4×4 with ProTrac Kit
  • Traxxas® Stampede® 4X4 with ProTrac Kit

6082-02 – $8.03

This is Replacment ProTrac™ 4×4 Suspension Kit arms for the Slash® 4×4 and Stampede® 4×4.

Features:

  • Beefy and Trick Suspension Arms – Made in the USA

What’s Included:

  • Front or Rear ProTrac™ arms (1 Left arm and 1 Right arm)

Fits:

  • Traxxas® Slash® 4×4 with ProTrac Kit
  • Traxxas® Stampede® 4X4 with ProTrac Kit

6082-01 – $12.71

Pro-Line has stunned the competition and shocked the racing community with the latest in high-performance race tire technology: the Tazer, now for Short Course Trucks! With the inputs of World Class drivers Ty Tessmann and Ryan Cavalieri, Pro-Line has created a race tire that provides unmatched forward bite in loose and dusty track conditions without the undesired edginess. The Tazer features large overlapping center treads designed to last and perfectly sized lugs that will propel you to the top of the podium. Bring the competition to its knees – Get some Tazer tires today!

Features:

  • Inspired by World Class racers Ty Tessmann and Ryan Cavalieri
  • Incredible forward traction in dusty conditions
  • Represents newest in tire tread technology
  • Includes durable, long lasting closed cell inserts
  • Made in the USA, since 1982

What’s Included:

  • Tazer SC Tires (2 pcs)
  • Closed Cell Foam Inserts (2 pcs)

Specs:

Height: 4.22″ (107mm)
Width: 1.81″ (46mm)

1185-02 M3 (Soft)
1185-03 M4 (Super Soft)

for ProTrac Suspension Kit Slash and others

This is a pair of Tazer SC 2.2”/3.0” Tires Mounted on ProTrac™ Renegade Black Wheels. Pro-Line has stunned the competition and shocked the racing community with the latest in high-performance race tire technology: the Tazer, now for Short Course Trucks! With the inputs of World Class drivers Ty Tessmann and Ryan Cavalieri, Pro-Line has created a race tire that provides unmatched forward bite in loose and dusty track conditions without the undesired edginess. The Tazer features large overlapping center treads designed to last and perfectly sized lugs that will propel you to the top of the podium.

Radical, revolutionary maybe even a bit of an outlaw, that is what a Renegade is all about and it defines the new SC wheels from Pro-Line to a “T”. That’s right, the design department at Pro-Line thought it was time to change it up and bring to life another bold looking SC wheel. The Pro-Line Renegade wheel for SC trucks features a tough 10 spoke design replicating the latest in high performance full size forged racing wheels used by the pros. Detailed beadloc and lug nut hardware only adds to the realism. Be the Renegade at your track and bring the competition to its knees – Get some pre-mounted Tazer tires today!

Features:

  • Inspired by World Class racers Ty Tessmann and Ryan Cavalieri
  • Incredible forward traction in dusty conditions
  • Represents newest in tire tread technology
  • Lightweight one-piece wheel design
  • Includes durable, long lasting closed cell inserts
  • Made in the USA, since 1982

What’s Included:

  • Tazer SC Tires (2 pcs) Mounted with:
  • Closed Cell Foam Inserts (2 pcs)
  • Renegade Black Wheels (2 pcs)

Fits:

  • [F/R] Traxxas® Slash with ProTrac Suspension Kit Arms (#6062-00)
  • [F/R] Associated SC10 with Front Inboard Hub (#6068-00) and Rear Adapters (#6064-05)
  • [F/R] Associated SC10 4×4
  • [F/R] Losi XXX-SCT (Front Inboard Hub kit #6069-00)
  • [F/R] Losi TEN-SCTE 4WD (with trimming on webbing for front)

Specs:

Height: 4.22″ (107mm)
Width: 1.81″ (46mm)

1185-15 M3 (Soft) Mounted/Black
1185-19 M4 (Soft) Mounted/Black

for Slash*, Slash 4×4, SCRT10 & Blitz Front or Rear

This is a pair of Tazer SC 2.2”/3.0” Tires Mounted on ProTrac™ Renegade Black Wheels. Pro-Line has stunned the competition and shocked the racing community with the latest in high-performance race tire technology: the Tazer, now for Short Course Trucks! With the inputs of World Class drivers Ty Tessmann and Ryan Cavalieri, Pro-Line has created a race tire that provides unmatched forward bite in loose and dusty track conditions without the undesired edginess. The Tazer features large overlapping center treads designed to last and perfectly sized lugs that will propel you to the top of the podium.

Radical, revolutionary maybe even a bit of an outlaw, that is what a Renegade is all about and it defines the new SC wheels from Pro-Line to a “T”. That’s right, the design department at Pro-Line thought it was time to change it up and bring to life another bold looking SC wheel. The Pro-Line Renegade wheel for SC trucks features a tough 10 spoke design replicating the latest in high performance full size forged racing wheels used by the pros. Detailed beadloc and lug nut hardware only adds to the realism. Be the Renegade at your track and bring the competition to its knees – Get some pre-mounted Tazer tires today!

Features:

  • Inspired by World Class racers Ty Tessmann and Ryan Cavalieri
  • Incredible forward traction in dusty conditions
  • Represents newest in tire tread technology
  • Lightweight one-piece wheel design
  • Includes durable, long lasting closed cell inserts
  • Made in the USA, since 1982

What’s Included:

  • Tazer SC Tires (2 pcs) Mounted with:
  • Closed Cell Foam Inserts (2 pcs)
  • Renegade Black Wheels (2 pcs)

Fits:

[R] Traxxas® Slash
[F/R] Traxxas® Slash 4×4
[F/R] Jammin SCRT10
[F/R] HPI Blitz

Specs:

Height: 4.22″ (107mm)
Width: 1.81″ (46mm)

1185-16 M3 (Soft) Mounted/Black
1185-20 M4 (Soft) Mounted/Black

This is a Pro-Line Flo-Tek Ford® F-150 Raptor SVT Clear Body for Short Course Trucks. Are you a die-hard Ford® fan who needs the benefit of Flo-Tek technology to make that huge triple without blowing over? Now you can have the newest in race body styling technology and show off your love for Ford® with Pro-Line’s new Flo-Tek Ford® F-150 Raptor SVT body for short course trucks. This body features ultra-low, sleek body lines and distinctive Ford® details blended with Flo-Tek technology that will make your SC truck look good going around the track. All Ford® fans need Pro-Line’s new Flo-Tek Ford® F-150 Raptor SVT Clear Body!!!

Features:

  • Bold Ford® F-150 Raptor SVT styling
  • Flo-Tek technology specifically designed to minimize parachute effect
  • Bolt on modular number and side dam plates
  • Exceptional detail and style
  • Made with Crystal Clear Genuine GE Lexan®
  • Four step to Race Ready:

1.) Clean Body and apply included window mask
2.) Paint then peel the over-spray film off
3.) Sticker your body (decal sheet included)
4.) Mount your new Ford® F-150 Raptor SVT onto your Short-Course Truck

  • Made in the USA, since 1982

What’s Included:

  • Flo-Tek Ford® F-150 Raptor SVT Body (1 pc)
  • Number and side dam plates (4 pcs)
  • Aluminum Hardware Packs
  • Window templates
  • Decal Sheet

Fits:

Traxxas® Slash
Traxxas® Slash 4×4 [shown]
Asociated SC10
Associated SC10 4×4
Losi XXX-SCT
Losi TEN-SCTE 4WD
HPI Blitz
Ultima SC

Specs:

Length: 21.1″ (536mm)
Width: 9.0″ (229mm)
Height: 5.8″ (147mm)
Wheel Base: 12.6″ (320mm)

3366-00 – $35.66

This is a BullDog Clear Body for the Team Associated B44.1 Buggy. Ryan Cavalieri is coming off an incredible season winning the 2011 IFMAR World Championships in both 4wd and 2wd buggy running Pro-Line’s highly coveted line of BullDog Bodies. For 2012, Ryan has improved upon the design and developed the most advanced body yet: the 2012 BullDog body. Ryan took great care in refining the design for 2012 to create even more stability with enhanced steering to gain an advantage on the track. The windshield is steeper to create more down force over the front wheels and the roof ridges have been raised to channel the air flow over the middle of the body for increased high-speed stability. The rear of the roof has been lowered and fins have been added to achieve stable air flow over the body. The fins also add rigidity to the body to increase aerodynamic efficiency. This is a must have body for the B44.1 for the new racing season!

Features:

  • Improved performance for 2012
  • More stability and improved steering
  • Made with Crystal Clear Genuine GE Lexan®
  • Four step to Race Ready:

1.) Clean Body and apply included window mask
2.) Paint then peel the over-spray film off
3.) Sticker your body (decal sheet included)
4.) Mount your new body onto your Buggy

  • Made in the USA, since 1982

What’s Included:

  • 2012 BullDog Body (1 pc)
  • Window templates
  • Decal Sheet

Fits:

  • Team Associated B44.1 Buggy

3372-00 – $25.03

This is a BullDog Clear Body for the Team Durango DEX410 Buggy. Pro-Line Factory Team driver and TD pilot from Austria Hupo Honigl asked Pro-Line to develop the most advanced body yet for his race cars. Pro-Line delivered with the 2012 BullDog body specifically designed around the unique Team Durango buggy. The design incorporates the new BullDog styling for 2012 that creates even more stability with enhanced steering to gain an advantage on the track. The windshield is steeper to create more down force over the front wheels and the roof ridges have been raised to channel the air flow over the middle of the body for increased high-speed stability. The rear of the roof has been lowered and fins have been added to achieve stable air flow over the body. The fins also add rigidity to the body to increase aerodynamic efficiency. This is a must have body for the DEX410 for the new racing season because of the enhanced performance and style!

Features:

  • 2012 BullDog styling for your Durango
  • More stability and improved steering
  • Made with Crystal Clear Genuine GE Lexan®
  • Four step to Race Ready:

1.) Clean Body and apply included window mask
2.) Paint then peel the over-spray film off
3.) Sticker your body (decal sheet included)
4.) Mount your new body onto your Buggy

  • Made in the USA, since 1982

What’s Included:

  • 2012 BullDog Body (1 pc)
  • Window templates
  • Decal Sheet

Fits:

  • Team Durango DEX410 Buggy

3374-00 – $25.03

This is a BullDog Clear Body for the Team Durango DEX210 Buggy. Pro-Line Factory Team driver and TD pilot from Austria Hupo Honigl asked Pro-Line to develop the most advanced body yet for his race cars. Pro-Line delivered with the 2012 BullDog body specifically designed around the unique Team Durango buggy. The design incorporates the new BullDog styling for 2012 that creates even more stability with enhanced steering to gain an advantage on the track. The windshield is steeper to create more down force over the front wheels and the roof ridges have been raised to channel the air flow over the middle of the body for increased high-speed stability. The rear of the roof has been lowered and fins have been added to achieve stable air flow over the body. The fins also add rigidity to the body to increase aerodynamic efficiency. This is a must have body for the DEX210 for the new racing season because of the enhanced performance and style!

Features:

  • 2012 BullDog styling for your Durango
  • More stability and improved steering
  • Made with Crystal Clear Genuine GE Lexan®
  • Four step to Race Ready:

1.) Clean Body and apply included window mask
2.) Paint then peel the over-spray film off
3.) Sticker your body (decal sheet included)
4.) Mount your new body onto your Buggy

  • Made in the USA, since 1982

What’s Included:

  • 2012 BullDog Body (1 pc)
  • Window templates
  • Decal Sheet

Fits:

  • Team Durango DEX210 Buggy

3375-00 $25.03

Desperado 2.8″ (Traxxas® Style Bead) Black Chrome Wheels for JATO®, Stampede® and Rustler®

Pro-Line’s highly anticipated new 6-spoke wheel will make your truck the toughest looking one on the block. The wheel is a one-piece glue wheel made out of extremely durable nylon material and features a molded in bead-loc ring for an awesome scale look. Pro-Line has combined high strength nylon with a super stealthy Black Chrome finish to give you the ultimate in wheel selection and style. This wheel will accept all Pro-Line 2.8” Traxxas® Style Bead tires along with all Traxxas® 2.8” tires, giving you a ton of rubber options. Make your truck stand out from the rest and get some Pro-Line Desperado 2.8” wheels today!

Features:

  • Aggressive 6-spoke wheel design
  • Stealthy Black Chrome finish
  • Molded in Bead-loc ring for scale look
  • Works with all 2.8” Traxxas® Style Bead tires
  • Also available in Black and Chrome
  • Made out of durable nylon material
  • Made in the USA, since 1982

What’s Included:

  • Desperado 2.8″ Traxxas® Style Bead Black Chrome Wheels (2 pcs)

Fits:

2728-11

  • [F] Traxxas® Stampede® Nitro
  • [F] Traxxas® Rustler® Nitro
  • [F] Traxxas® JATO®

2729-11

  • [R] Traxxas® Stampede® Nitro
  • [R] Traxxas® Rustler® Nitro
  • [R] Traxxas® JATO®
  • [F] Traxxas® Stampede® Electric
  • [F] Traxxas® Rustler® Electric
  • [F/R] Traxxas® Stampede® 4×4

2730-11

  • [R] Traxxas® Stampede® Electric
  • [R] Traxxas® Rustler® Electric

2728-11 Nitro [F]
2729-11 Nitro [R], Electric [F], 4×4 [F/R]
2730-11 Electric [R]

IMAGE NOT AVAILABLE
2012 BullDog Clear Body for MBX6 ECO

This is a BullDog Clear Body for the Mugen MBX6 ECO Electric Buggy. The MBX6 ECO Electric buggy has been tearing up indoor and outdoor race events around the country, so Pro-Line decided to improve the performance even more by introducing the 2012 BullDog MBX6 ECO body. The body includes the unique 2012 BullDog styling and performance along with several cutouts to keep your electronics running cool. Pro-Line took great care in refining the design for 2012 to create even more stability with enhanced steering to gain an advantage on the track. The windshield is steeper to create more down force over the front wheels and the roof ridges have been raised to channel the air flow over the middle of the body for increased high-speed stability. The rear of the roof has been lowered and fins have been added to achieve stable air flow over the body. The fins also add rigidity to the body to increase aerodynamic efficiency. This is a must have body for the MBX6 ECO for the new racing season!

Features:

  • Improved performance for 2012
  • Cutouts designed to keep you running cool
  • More stability and improved steering
  • Made with Crystal Clear Genuine GE Lexan®
  • Four step to Race Ready:

1.) Clean Body and apply included window mask
2.) Paint then peel the over-spray film off
3.) Sticker your body (decal sheet included)
4.) Mount your new body onto your Buggy

  • Made in the USA, since 1982

What’s Included:

  • 2012 BullDog Body (1 pc)
  • Window templates
  • Decal Sheet

Fits:

  • Mugen MBX6 ECO Electric Buggy

3376-00 – $25.88

This is the Scale Accessory Assortment #4 for Scale Crawlers. The Pro-Line Racing Off Roaders Truck Tool Box replicates a realistic truck tool box which you would find on a real 1:1 off Road Truck. The box contains two very highly detailed Spare axles that are removable. Basic dimensions of the box are 6 ¼” wide x 1 5/8” Wide at the lid and 1” deep at the center well. The lid is hinged for easy opening and closing. Pro-Lines truck tool box gives your scale truck / rig new – unparalleled realism never seen before in any other scale accessories!

Features:

  • Highly Detailed Replica Support Equipment
  • Adds unparalleled realism to your Scale Rock Crawler

What’s Included:

  • Hinged Tool Box (1 pc)
  • Removable Spare Axles (2 pcs)

6072-00 $24.95 (MAP)

This is the Scale Accessory Assortment #5 for Scale Crawlers. What is any extreme 4X4 support rig without the proper tools? Assortment #5 gives you a very realistic portable welder, as well as a 24V Impact gun with Socket Detail. The set also includes a Sledge Hammer and a Tool Tray that works with the #6072-00 Tool Box! Pro-Lines Scale Accessories Assortment #5 Put’s the right tools for your Scale 4X4 easily at hand.

Features:

  • Highly Detailed Replica Support Equipment
  • Adds unparalleled realism to your Scale Rock Crawler
  • Incredible Hand Painted Detail

What’s Included:

  • Tool Box Tray (1 pc)
  • Portable Welder (1 pc)
  • Cordless Impact Gun (1 pc)
  • Sledge Hammer (1 pc)

6073-00 $22.95 (MAP)

This is the Scale Accessory Assortment #6 for Scale Crawlers. Extreme 4×4’s call for Extreme Power and our Assortment #6 delivers. You get two simulated Dry Cell batteries with hardware that allows you to configure either a dual or single battery system. Backing that up, is a highly detailed replica of a 3000K Power inverter. With Pro-Lines Scale Accessories Assortment #6 your Scale rig will never be in short supply of electrical power.

Features:

  • Highly Detailed Replica Support Equipment
  • Adds unparalleled realism to your Scale Rock Crawler
  • Incredible Hand Painted Detail

What’s Included:

  • Dry Cell Batteries (2 pcs)
  • Battery Mounting Hardware (1 pc)
  • 300K Power Inverter (1 pc)

6074-00 $22.95 (MAP)

This is the Scale Accessory Assortment #7 for Scale Crawlers. What would an action packed day of scale 4X4 activity be without the proper support equipment? Assortment #7 gives your rig the look that it’s ready to take on the longest of Scale 4×4 excursions with the highly detailed Water and fuel cans, as well as the Trench shovel. The pack also features a replica Fire extinguisher with an all-purpose mounting bracket, which can be found on all serious Full-Scale Rock Crawling rigs to put out those nasty engine fires. With Pro-Lines Scale Accessories Assortment #7 your Scale rig will never be lacking the essentials that any scale 4X4 excursion requires.

Features:

  • Highly Detailed Replica Support Equipment
  • Adds unparalleled realism to your Scale Rock Crawler
  • Incredible Hand Painted Detail

What’s Included:

  • Water Jug (1 pc)
  • Plastic Fuel Can (1 pc)
  • Fire Extinguisher (1 pc)
  • Trench Shovel (1 pc)

6075-00 $22.95 (MAP)

[nggallery id=647]

If you like this article, check out this additional article on Pro-Line.

The post Pro-Line February 2012 Releases appeared first on RC Car Action.

Trevor Duncan

Engineering leader at a pre-IPO startup