Pro-Line and PROTOform Early September Releases

Sniper SC 2.2″/3.0″ M2 (Medium) Tires for Slash, Slash 4×4, Slayer, SC10 & Blitz Front or Rear

Honey, I blew up the Hole Shot! The Sniper uses the same design philosophy and technology as the Hole Shot, but scaled up to work on looser and dustier track conditions. After initial testing, Pro-Line team drivers Ryan Cavalieri and Travis Amezcua are already sold on the tire saying that the Sniper offers awesome forward traction and side bite on a variety of track conditions. The bigger pins also provide longer wear, giving you lasting traction through long A-mains.

“I had a chance to run the Pro-Line Sniper tires at Hot Rod, let me say, these are going to be a winner! Most noticeable was how much more traction/steering they had when the track was loose (the sun was still out and kinda wet, kinda dry). Normally my cars turn best with M4 Hole Shots, however, I ran the snipers in M3 and they turned just as good and had more bite out of the corners. The Sniper tires were great!”
– Chad Bradley, Team Driver

Eliminate the competition by picking up a set of Pro-Line’s new Sniper tires.

Tire Features:

• Based on the World Champion Hole Shot
• Pro-Line’s square-lug technology
• Larger lugs for longer wear
• Made from M2 (Medium), M3 (Soft), M4 (Super Soft)

What’s Included:

• Sniper tires (2 pcs)
• Closed Cell SC Inserts (2 pcs)
• Gray Inserts for stock wheels (2pcs)

SPECS:

Height:4.23″ (107mm)
Width:1.70″ (43mm)

1165-01 | M2 (Medium)
$21.95

Jeep Wrangler Unlimited Rubicon Clear Body for 12.3″ Wheelbase 1:10 Scale Crawlers

The Jeep® Wrangler Unlimited Rubicon body. Rugged, tough and soon to be classic styling are now available from Pro-Line for 1:10 Scale Builders and Rock Crawler owners.

The Jeep® Wrangler Unlimited Rubicon is one of the first RC bodies to offer innovative hi-detail features such as front and rear bumpers and taillight lenses that are is easily attached with double stick tape or hardware of your choice. It’s Jeep® styling is a perfect match to it’s full size counterpart that made is an automotive classic.

Made from super strong lexan material, the Jeep® Wrangler Unlimited Rubicon is ready for off-roading in a dirt field or rock mountain near you.

Features:

• Made with Genuine GE Lexan®
• Fits 12.3″ Wheelbase Rigs
• Classic body lines
• Paint then peel overspray film, sticker sheet,and window masks included
• ** Double sided servo tape needed to install bumpers ** NOT INCLUDED
• * Extended rear body post are required ** NOT INCLUDED

When mounting on an Axial SCX10, Axial’s AX80031 body post is required.

What’s Included:

• Clear Jeep® Wrangler Unlimited Rubicon Body
• Jeep® Wrangler Unlimited Rubicon decal sheet
• Window mask included
• Paint-then-peel overspray film included

3336-00 | Jeep Wrangler Unlimited Rubicon

P909 PRO-Lite Clear Body

By popular demand PROTOform is now making the “PRO-Lite” version of the P909 1:8 On-Road body available to everyone. The success and reputation of this body continues to grow after championship winning racers in the UK, USA, Holland, Austria, China, and Venezuela have used it to stand atop the victory podium. Mike Swauger’s won the ROAR Nationals title using the P909 body as did and Robert Pietsch in his domination of the 2010 1:8 On-Road European Championships in Italy.

Now your local hobby shop owner is able to supply you with the same extra – PRO-Lite version that is used by the pros.

** Not recommended for novice racers **

Features:

• Made from extremely durable .025 Lexan® material
• Paint-then-Peel protective film

What’s included:

• Clear P909 PRO-Lite Body(1 pc)
• PROTOform decal sheet (1 pc)

Body Specs:

Length:19.7″ (500mm)
Width:10.6″ (270mm)
Height:N/A
Wheel Base:11.6″ (293mm

1504-250 | P909 PRO-Lite
$34.95

P37-N (Nitro) Clear Body

For the last 6 years the PROTOform Stratus 3.1 has been one of the most popular and successful 200mm gas-sedan bodies. It’s still used even today in race winning performances by many top ranked pro drivers. Today, PROTOform is proud to release the P37-N (nitro) 200mm Gas Sedan body to continue that legacy. This new P37-N body us
es some of the time tested and proven design features of the 3.1 but include many evolutionary improvements to aid down force and steering capabilities. The wing struts are enlarged and new oversized nylon wing hardware is now included with the body. The body conforms to all the ERFA “Global Body Spec” criteria. It comes with protective coating, decals and window masks. It’s available in “Lite” and PRO-Lite” weights.

This baby just looks fast – even standing still!

Features:

• Made from extremely durable .025 Lexan® material
• Conforms to all the Global Body Spec criteria
• Enlarged wing struts with new Nylon hardware
• Paint-then-Peel protective film

What’s included:

• Clear P37-N Body(1 pc)
• Window Mask
• Wing mounting hardware
• Decal sheet (1 pc)

1524-25 | P37-N 200mm
$25.95