Skip to content
FREE economy shipping on all orders over $99* US (lower 48 states)
FREE economy shipping on all orders over $99* US (lower 48 states)

MRC reveals GV2 2WD buggy prototype

From MRC:
 This is NOT the production car, so there might be some changes before it hits the market.
MRC/Team Academy “GV2 Pro” 2wd buggy.
Part# 15108
– Threaded shocks with bladders that can be flipped upside down for a more
  conventional emulsion type shock feel.
– No e-clips (captured hingepins)
– 27.5 kick-up with bellcrank matching the same angle
– Vertical ball studs on the front and rear bulkheads
– Rear axle will accept the ACADEMY hex rear rim, along with “MOST” other pin
  drive rims
– Front axle will accept the ACADEMY metric front bearing/rim, but…..
  there will be an additionaL ASE sized axle included so that Team Associated
  B4 front rims, and Proline B4 rims can be used as welL.
– Aluminum hingepin blocks have plastic balls that snap into them so that
  there is not excess force applied to the aluminum when changing
  antisquat / toe-in.
– Steel outdrives with Over Sized rings, that makes for a longer lasting diff
– Gear cover that is virtually air tight,  gear cover plug is tethered to the
  gear cover so that you dont lose it.
– Chunky CVA drives make the rear suspension bind free throughout
  suspension travel.
– Multi Length Pivot (MLP) on the hub carrier and arms both front and rear
  for long or short suspension geometry.
– Front bulkhead and shock tower are keyed and screwed together.
– Front hingepin block is keyed into both the upper bulkhead and also
  the lower bulkhead.
– Front Hingepin block has replaceable teflon sleeves.
– Rack or traditional style bellcrank is offered.

For more news, click here.

The post MRC reveals GV2 2WD buggy prototype appeared first on RC Car Action.

Previous article TBR R2 EXO Cage External Roll Cage For The Traxxas X-Maxx