Cobra 10” Billet Hard Anodized – Cobra 10” Billet Hard Anodized
Tires Front / Rear
Dunlop 60/100-10 MX3SF / Dunlop 70/100-10 MX3S
“Why Buy” a 2016 Cobra CX50 P3
Broad Torque Curve
Excellent low-end torque and over-rev!
No compromise power delivery
5Gx 3-Shoe Clutch (4th Generation)
No plates to warp, Precision, consistent operation. Freewheeling design.
Hits as hard at the end of a moto as it does on Lap 1. No clutch drag when the throttle is chopped or during starting.
USD 32mm Front Fork
Mechanical spring for consistent operation. Improved fork action. ‘Right Sized’ for a small chassis.
Inspires confidence over rough terrain
REAL air filter
Air filter is mounted in airbox, not on top of air box. More surface area, More protection from dirt
Dirt or water that enters airbox cannot make its way into the engine. More power (especially in long motos and dusty off-road events)
Largest Air box in Class
Large pre-carburetor volume greatly improves throttle response.
Power when you need it!
One-Piece Aluminum Wheels
Stronger, Lighter Wheels
Reduced maintenance, improved acceleration and traction over rough terrain.
Billet, Wide Footprint Triple Clamp
Spreads the clamp load out over a larger area of the fork upper tube
Improved fork action
Billet Chain Adjuster Blocks
Strongest in class
Never DNF from a slipping rear axle again!
Optimized chassis and bodywork
Longest travel suspension in its class by over an inch
Absorbs the pounding of rough terrain for better lap time and a less fatiguing ride.
Cobra Friction Drive
Allows some slip between the crank and rear wheel
Longer driveline life (crank, transmission, clutch, chain) and improved drive through rough choppy terrain
Progressive Rate Rear Suspension
Linear rising rate without a link! Reduced weight, and friction
Supple over small bumps for good traction…
Absorbs big hits for aggressive riding.
Engine / Chassis Package
Easy to maintain
No need to remove bodywork or purchase special tools to change a plug or jet the carb!
Cobra VS. Competition
2018 Cobra CX50 P3 Highlights & Improvements
The littlest Cobra was ridden home to its first ever national championship in 2017…In fact, the P3s dominated the competition at Loretta Lynn’s Ranch this summer. Check out the improvements for 2018:
NEW! CARD Front & Rear Brake Systems – The days of adapting bicycle brakes are over! All Cobra 50s now come equipped with purpose built and designed minicycle brakes that will help take performance to the next level. The all-new CARD front and rear brake systems have better feel, more stopping power, and are easier to maintain. Furthermore, the front brake comes standard with a break-away lever, and there is adjustability and a choice of levers to fit every size of hand!
NEW! Lightweight Wheels – The evolution of our class-leading ‘mag’ wheels continues with reduced weight and all-new super lightweight and cool looking brake discs. To wrap up this awesome package, the engineering geeks at Cobra also replaced all steel wheel bearing spacers with hard anodized 7075-T6 aircraft aluminum units to save a few more grams of un-sprung and rotating mass. Lightweight, ZERO maintenance, and great looking. Lighter wheels mean less rotating and un-sprung mass, which translates into improved acceleration, handling, and flight control.
NEW! Billet Triple Clamps with Adjustable Bar Mounts – Both little 50cc models receive an all-new top triple clamp this year for increased steering clearance and a roomier rider compartment. Works-level hardware on a junior scale bike!
NEW! Dunlop Geomax MX3S Intermediate-Terrain Tires – The 3S has proven itself to be the ultimate minicycle tire over the past few years, so of course Cobra will offer it as standard equipment. No corners cut here!
Venom Series Engine – The P3 is also powered by Cobra’s Venom Series 50cc powerplant. This thing rips! Cobra engineers designed a ‘no-compromise’ torque curve featuring massive amounts of low-end torque for launching off the gate and out of corners, this in addition to Cobra’s classic over-rev that provides that ‘2nd gear’ for wide open situations. This little beast offers more power, more torque, less weight and a smaller, lighter package.
Micro Handle Bars – Cobra is proud to offer Pro-Taper’s innovative Micro Handlebars across our 50cc lineup. These bars will revolutionize the way that young riders control their motorcycles by offering a reduced diameter grip area that inspires confidence and reduced fatigue.
Bel-Ray Factory Fill – Cobra and Bel-Ray, two proud American companies with a long history in motocross, have teamed up to ensure that each Cobra model comes from the factory with the finest in lubricants and chemicals. This includes everything from wheel bearing grease, to brake fluid, to suspension fluid, to the oil on the air filter.
5Gx Freewheeling Clutch – Precision engagement, durable, freewheels for increased corner speed and easier starting.
Lighter Springs in Front & Back
For riders 38 lbs or less.
Heavier Springs in Front & Back
For riders 46 lbs or more.
Custom Seat Cover
Blue or Red Factory Seat Cover
Fully Custom Seat Cover
Fully custom seat cover, choose from millions of possible color combinations. For the background, rib color, and rib accent stripe color.
Available in black, blue, red or bronze. Includes Bar Risers, Oil Plugs, Triple Clamps, Rear Sprockets, Wheel Spacers, Brake Eccentric
Cobra minibikes have fast become well-known around the world as the fastest minicross or kid's motocross bikes in their class. With over 42
Loretta Lynn's Championships, 300+ All US & International Championships, 500+ Regional Championships, and over 500+ Local Races Won, it's no surprise that kids ask for Cobra by name.
Made in the USA. - The Cobra Factory manufacturer makes its own engines and chassis in-house, and they have full manufacturing capabilities for many of the components. Of course, there are some parts like carburetors and suspension that are purchased elsewhere, however, we always seek out the best companies in the world to work with for items that cannot be found locally.
* Free shipping for online orders only, some products do not qualify for free shipping and may have additional shipping charges.
Standard Waiting Time on New Bikes is 4-6 Weeks. Special Bike Packages Do Not Include In-Stock Bikes